07252017Tue
Last updateTue, 25 Jul 2017 7pm

i

How to Choose the Best Rapid Prototyping Method

How to Choose the Best Rapid Prototyping Method

As new products are designed, including ...

Monitoring Valve Health via the Internet

Monitoring Valve Health via the Internet

Most valve end users are already using s...

Valves in Oxygen Service

Valves in Oxygen Service

In his presentation at VMA’s 2017 ...

Thermal Spray Coating

Thermal Spray Coating

Q: What are the pros and cons of us...

Subscribe SUM17

FREE SUBSCRIPTION*

•  Print magazine
•  Digital magazine
•  VALVE eNews
Read the latest issue

*to qualified valve professionals in the U.S./Canada

The Weekly Report

New Products

  • ja-news-2
  • ja-news-3

Industry Headlines

Crane Co. Reports Second Quarter Results

Tuesday, 25 July 2017  |  Chris Guy

Crane Co. reported second quarter 2017 earnings of $1.14 per diluted share, compared to $1.15 per share in the second quarter of 2016. Excluding Specia...

Readmore

Loading...
Advertisement
i

Web Only

The Actuation Selection Process

The Actuation Selection Process

Tuesday, 25 July 2017  |  Carlos Gamero

A common misconception in our industry is that actuating a valve is as simple as putting the most cost-efficient actuator on top of your valve of choi...

Readmore

Loading...

Industry Headlines

Crane Co. Reports Second Quarter Results

-1 DAYS AGO

Crane Co. reported second quarter 2017 earnings of $1.14 per diluted share, compared to $1.15 per share in the second quarter of 2016. Excluding Special Items, second quarter 2017 earnings per diluted share were $1.17, compared to $1.21 per share in the second quarter of 2016.

Second quarter 2017 sale...

Readmore

Badger Alloys Joins VMA as Associate Member

7 DAYS AGO

This week the Valve Manufacturers Association (VMA) welcomes Badger Alloys as an official associate supplier member. This is VMA’s fourth new member in 2017.

Located in the heart of Milwaukee and founded in 1966, Badger Alloys offers single source capabilities for custom castings. The company pou...

Readmore

U.S. Chemical Production Moved Higher in June

19 MINS AGO

According to the American Chemistry Council (ACC), the U.S. Chemical Production Regional Index (U.S. CPRI) edged higher by 0.3% in June, following a 0.3% gain in May, and a 0.4% decline in April, as measured on a three-month moving average (3MMA) basis. During June, output grew in all regions except t...

Readmore

U.S. Fuel Ethanol Production Continues to Grow in 2017

1 DAY AGO

Through the first six months of 2017, U.S. weekly ethanol production averaged 1.02 million barrels per day (b/d), an increase of 5% over the same period in 2016. On a weekly basis, U.S. ethanol production set a record of 1.06 million b/d in the week of January 27, 2017, and it has averaged near or a...

Readmore

IHS Market PMI Index Reached Four-Month High in July

3 HOURS AGO

July data revealed a further acceleration in business activity growth across the U.S. private sector. At 54.2, up from 53.9 in June, the seasonally adjusted IHS Markit Flash U.S. Composite PMI Output Index signaled the strongest rate of expansion since January.

The pickup in business activity growth ...

Readmore

IMF Lowers 2017 Growth Forecast for U.S.

1 DAY AGO

The growth forecast in the United States has been revised down from 2.3% to 2.1% in 2017 and from 2.5% to 2.1% in 2018, according to the IMF’s World Economic Outlook. While the markdown in the 2017 forecast reflects in part the weak growth outturn in the first quarter of the year, the major fa...

Readmore

Emerson Introduces CSI 2125-IS Machinery Health Analyzer

CSI 2125-IS 210X225Emerson Process Management introduces the intrinsically safe CSI 2125-IS Machinery Health Analyzer. The CSI 2125-IS is certified for use in intrinsically safe IECEx and ATEX Zone 0 and Zone 1 hazardous areas.

The CSI 2125-IS expands Emerson’s route-based machinery analyzer portfolio so that users can access predictive diagnostics from hazardous areas of their operation to make better decisions around machinery health for their entire plant, without compromising safety.

Users of the CSI 2125-IS can customize alarm parameters and integrate collected data with AMS Suite asset management software for deeper analysis and collaboration with other machinery health technologies like oil and infrared analysis. The integration of field data with asset management functionality delivers an in-depth view of machinery condition and enables economical prioritization and planning of corrective action.

www.emersonprocess.com

  • Latest Post

  • Popular

  • Links

  • Events

Advertisement

Looking for a career in the Valve Industry?

ValveCareers Horiz

To learn more, watch the videos below or visit ValveCareers.com a special initiative of the Valve Manufacturers Association