07252017Tue
Last updateTue, 25 Jul 2017 1pm

i

How to Choose the Best Rapid Prototyping Method

How to Choose the Best Rapid Prototyping Method

As new products are designed, including ...

Monitoring Valve Health via the Internet

Monitoring Valve Health via the Internet

Most valve end users are already using s...

Valves in Oxygen Service

Valves in Oxygen Service

In his presentation at VMA’s 2017 ...

Thermal Spray Coating

Thermal Spray Coating

Q: What are the pros and cons of us...

Subscribe SUM17

FREE SUBSCRIPTION*

•  Print magazine
•  Digital magazine
•  VALVE eNews
Read the latest issue

*to qualified valve professionals in the U.S./Canada

The Weekly Report

New Products

  • ja-news-2
  • ja-news-3

Industry Headlines

IHS Market PMI Index Reached Four-Month High in July

Tuesday, 25 July 2017  |  Chris Guy

July data revealed a further acceleration in business activity growth across the U.S. private sector. At 54.2, up from 53.9 in June, the seasonally ad...

Readmore

Loading...
Advertisement
i

Web Only

The Actuation Selection Process

The Actuation Selection Process

Tuesday, 25 July 2017  |  Carlos Gamero

A common misconception in our industry is that actuating a valve is as simple as putting the most cost-efficient actuator on top of your valve of choi...

Readmore

Loading...

Industry Headlines

Badger Alloys Joins VMA as Associate Member

6 DAYS AGO

This week the Valve Manufacturers Association (VMA) welcomes Badger Alloys as an official associate supplier member. This is VMA’s fourth new member in 2017.

Located in the heart of Milwaukee and founded in 1966, Badger Alloys offers single source capabilities for custom castings. The company pou...

Readmore

Thermodyn Joins VMA as Associate Member

6 DAYS AGO

This week the Valve Manufacturers Association (VMA) welcomes Thermodyn Corporation as an official associate supplier member. This is VMA's third new member in 2017.

In 1979, Thermodyn began business with the dual purpose of selling A.W. Chesterton products and manufacturing high-temperature elastomers ...

Readmore

U.S. Fuel Ethanol Production Continues to Grow in 2017

19 HOURS AGO

Through the first six months of 2017, U.S. weekly ethanol production averaged 1.02 million barrels per day (b/d), an increase of 5% over the same period in 2016. On a weekly basis, U.S. ethanol production set a record of 1.06 million b/d in the week of January 27, 2017, and it has averaged near or a...

Readmore

LyondellBasell to Build the World's Largest PO/TBA Plant

3 DAYS AGO

LyondellBasell has made the final investment decision to build the world's largest propylene oxide (PO) and tertiary butyl alcohol (TBA) plant in the Houston area. The project is estimated to cost approximately $2.4 billion, representing the single-largest capital investment in the company's history...

Readmore

IHS Market PMI Index Reached Four-Month High in July

-1 DAYS AGO

July data revealed a further acceleration in business activity growth across the U.S. private sector. At 54.2, up from 53.9 in June, the seasonally adjusted IHS Markit Flash U.S. Composite PMI Output Index signaled the strongest rate of expansion since January.

The pickup in business activity growth ...

Readmore

IMF Lowers 2017 Growth Forecast for U.S.

20 HOURS AGO

The growth forecast in the United States has been revised down from 2.3% to 2.1% in 2017 and from 2.5% to 2.1% in 2018, according to the IMF’s World Economic Outlook. While the markdown in the 2017 forecast reflects in part the weak growth outturn in the first quarter of the year, the major fa...

Readmore

Solon Answers Belleville Springs Questions at MFDA Show

What is a Belleville spring? 

How can you keep a bolted joint tight?

What are the causes of bolt preload loss? 

Where are Belleville springs used?

If you can not answer these questions, you should attend our presentation at the MFDA show on September 15, 2008 at The Fiesta in Wood Ridge, NJ. We are giving two presentations throughout the show, but the content is the same for both times. Bring your Belleville spring questions to the show!  

Solon Belleville Springs, Solon Disc Springs and Solon Flange Washers are used in a variety of applications where high spring loads are required in a small space. 

They can help problematic applications such as bolted joints, electrical bus bar, heat exchangers, gasketed flange joints, and valve stem packing.

If you can't attend the show and are interested in learning more about Belleville springs, visit our website at www.solonmfg.com for product information and technical documents or contact Fran at This email address is being protected from spambots. You need JavaScript enabled to view it..

Source: Solon

  • Latest Post

  • Popular

  • Links

  • Events

Advertisement

Looking for a career in the Valve Industry?

ValveCareers Horiz

To learn more, watch the videos below or visit ValveCareers.com a special initiative of the Valve Manufacturers Association