Last updateTue, 24 Nov 2015 6pm


Power Plant Isolation Valves Beat the Heat

Power Plant Isolation Valves Beat the Heat

About a century ago, pressures of 300 ps...

NACE MR0175/ISO 15156 & NACE MR0103

NACE MR0175/ISO 15156 & NACE MR0103

Q: Is it possible to produce remanufactu...

Subscribe Fall15

Read the latest digital edition

Subscribe to the digital edition

Subscribe to the print edition

Subscribe to the biweekly VALVE eNews


New Products

  • ja-news-2
  • ja-news-3

Industry Headlines


Industry Headlines

Schlumberger-Cameron Union Receives Unconditional Clearance


Schlumberger Limited and Cameron International Corporation jointly announce that the U.S. Department of Justice has cleared their proposed merger without any conditions, granting early termination of the waiting period required by the Hart-Scott-Rodino Antitrust Improvements Act of 1976 with respect...


ITT Engineered Valves Approved for Star Voluntary Protection Program

ITT Engineered Valves Approved for Star Voluntary Protection Program

ITT Engineered Valves, LLC in Lancaster, PA has been approved by the Occupational Safety and Health Administration (OSHA) of the U.S. Department of Labor for the Star Voluntary Protection Program (VPP).

Approval into VPP is OSHA’s recognition of the exceptional efforts of employers and employ...


Global Petrochemical Prices Leveled Off in October


Prices in the $3-trillion-plus global petrochemicals market in October were virtually flat based on a monthly average, but edged slightly when valued on a month-end to month-end basis from September. This is the first time the markets have shown intermonth gains since May of this year, according to ...


U.S. Rig Count Less Than Half of Last Years Total


According to Baker Hughes, the U.S. rig count declined by 10 last week to 757. Of these 757 active rigs, 564 rigs are seeking oil and 193 are seeking natural gas.

Just a year ago, with oil prices nearly double what they now, there were 1,929 active rigs in the U.S.

The rig count was at its peak in...


Consumer Confidence Falls to 14-Month Low


The Conference Board Consumer Confidence Index, which had decreased moderately in October, declined further in November. The Index now stands at 90.4, down from 99.1 in October. The Present Situation Index decreased from 114.6 last month to 108.1 in November, while the Expectations Index declined to...


Manufacturing PMI Dips to 2-year Low


November data indicated a setback for U.S. manufacturing sector growth, following the modest rebound recorded during the previous month. At 52.6, down from 54.1 in October, the seasonally adjusted Markit Flash U.S. Manufacturing Purchasing Managers’ Index (PMI) pointed to the slowest improveme...


VMA’s Valve Basics Education Program Set for Denver, Oct. 11-12


1050 17TH STREET NW, SUITE 280, WASHINGTON DC 20036 | 202.331.8105




  • The Valve Manufacturers Association (VMA) developed this course to help industry newcomers
  • Education seminar offers in-depth sessions on valve, actuator and control fundamentals
  • Hands-on learning is featured during the “Valve Petting Zoo”
  • For more information, contact Judy Tibbs, director of education (This email address is being protected from spambots. You need JavaScript enabled to view it. or 804-639-1365).

(July 23, 2012—Washington, DC) VMA’s Valve Basics Seminar & Exhibits has drawn more than 600 people since it launched in 2009. This one-and-a-half-day program will be held in Denver at the Crowne Plaza Denver – International Airport, Oct. 11-12, 2012.

Attendees are those who want to learn the basics of industrial valves, Oct. 11-12 in Denver. At the heart of the seminar is the Valves & Actuators 101 course, which consists of lessons that guide attendees through the world of valves and the systems they help control, starting with simplest types of valves and moving into the more complicated automated products, including actuators and controls.

The event also features the popular “Valve Petting Zoo,” a unique hands-on experience that enables participants to “touch and feel” examples of the many products discussed during the course. Attendees are led in small groups around to tables where valves, actuators and controls are displayed. At each station, an industry expert is on hand to answer specific questions about the products and further explain how they work.

Although the Valves & Actuators 101 course was originally created for newcomers to the industry, it also has been popular for those who need a refresher course or wish to expand their knowledge about the products used to control flow in a variety of industries. In addition to mechanical engineering students (whose attendance is sponsored by VMA’s educational foundation) and engineers in the early phase of their careers, the seminar brings together employees and supervisors of plants that use valves, actuators and controls; professionals who are entering a new area of the industry; personnel who specify and purchase valves and related equipment; distributors and sales reps who want to better understand the products they sell; as well as personnel from valve manufacturing companies.

Before the petting zoo occurs on the morning of the second day, attendees participate in variety of sessions that provide a general overview of the valve industry and address key areas such as standards, basic piping information, and applications and operations. Attendees learn about the various valve types, including multi-turn, check, quarter-turn and pressure relief, as well as actuators (pneumatic, hydraulic and electric) along with controls and control systems. Near the end of the course on the second day, presenters lead an interactive session in which attendees apply their newly learned knowledge to determine which products are used in a variety of situations.

Also included is a tabletop exhibition that provides attendees time between education sessions to learn what is offered by valve, actuator and control manufacturers, suppliers to the valve industry, and valve repair and service firms.

Registration is open for the Oct. 11-12 event, but the early-bird rate will expire on Aug. 1. The cost is currently $565 for the first person from a company and $535 for each subsequent registration. After the end of July, the fee is $600 ($565 for subsequent registrations).

Those who complete the course receive a certificate from the Valve Manufacturers Association, indicating they have earned 10 hours of continuing education. Breakfast, lunch, beverage breaks and a reception, as well as a comprehensive reference manual, are also included.

For more information or to register, go to http://www.vma.org/?ValveBasics. Contact Judy Tibbs, VMA director of education (This email address is being protected from spambots. You need JavaScript enabled to view it.) if you have additional questions.

NOTE: A small number of exhibitor opportunities are still available at the tabletop exhibition being held in conjunction with the Denver event on Oct. 11. Exhibitors must be U.S. or Canadian manufacturers of valves, actuators and controls, or U.S. or Canadian suppliers of products and services for valve manufacturers. Review the exhibitor prospectus and register on VMA.org.


About the Valve Manufacturers Association

Founded in 1938, the Washington, DC-based Valve Manufacturers Association of America represents nearly 100 U.S. and Canadian manufacturers of valves, actuators and controls. Members account for approximately 80% of total industrial valve shipments out of U.S. and Canadian facilities. The North American valve industry supplies approximately 35% of worldwide valve demand, and VMA member companies employ 20,000 men and women in supporting jobs. VMA is the only organization exclusively serving U.S. and Canadian manufacturers of industrial valves, actuators and controls. Products manufactured by members are used in numerous industries, including: chemical processing; petroleum refining; oil and gas exploration, distribution and transmission; power generation; nuclear power; water/wastewater; commercial construction; and pulp and paper.

VMA is also publisher of the quarterly Valve Magazine, written for buyers, specifiers, users, distributors and manufacturers of industrial valves, actuators and controls.

# # #


  • Latest Post

  • Popular

  • Links

  • Events