09282020Mon
Last updateMon, 28 Sep 2020 2pm

Capstone Projects Team Undergraduates with Company Sponsors

Figure 1Figure 1. Students demonstrating their capstone project at The Polytechnic School, Arizona State University (Photo: Arizona State University)With the increasing need for new talent, especially in engineering, companies are seeking ways to connect with students before they graduate to build relationships that aid in the recruitment process for new engineers and other professionals. One option is to sponsor a capstone project.

WHAT IS A CAPSTONE PROJECT?

Many universities require final projects from their students, usually in the senior year of their undergraduate program. Often called capstone projects, these are intended to help students integrate what they have learned in their classes and experience working on a real-world project. Since problems in the working world are often complex, open-ended and require teamwork to solve, students who complete capstone projects gain a valuable introduction to their work life after graduation.

In engineering programs, capstone projects usually involve tackling a problem or design challenge posed by a company or nonprofit organization. Typically done by teams of students, these projects generally take place over two semesters, structured through capstone classes. At the end, the teams prepare reports and present their designs or solutions to the sponsoring company and to their academic department (Figures 1 and 3).

Sometimes the final presentations are open to the public. Some community colleges offer capstone projects, as well, and so do some graduate programs.

WHAT KIND OF PROJECTS?

Figure 2Figure 2. Automated keg washer for a craft brewery designed and built by a capstone project team (Photo: Rochester Institute of Technology)Engineering capstone projects range from designing, prototyping and testing consumer products to improving chemical processing to developing software and beyond. Some of the projects relate to valves and automation.

Students at The Ohio State University (OSU) have done several valve-related capstone projects for a company that produces a lot of valves for offshore applications, said Bob Rhoads, director of the engineering capstone program there. The projects included evaluating seawater corrosion of different materials and testing elastomers.

At the Polytechnic School at Arizona State University (ASU), a student team designed and built an automated flowline test stand to validate aircraft pneumatic valves after repair and overhaul procedures, said Tim Beatty, associate director of eProjects/capstone projects. Another team developed a fluid-powered bicycle. This included design, simulation, construction, testing and qualification of a bike for competition in the National Fluid Power Association Fluid Power Vehicle Challenge.

At Rochester (NY) Institute of Technology, a craft brewery sponsored a project to develop “a simple solution to automated keg washing made using readily available components.” The student team studied existing commercial keg washers and came up with a simplified approach that met the sponsor’s requirements (Figure 2).

For an additional sampling of projects, see: Examples of Capstone and Similar Company-Sponsored Projects. At some schools, the projects are interdisciplinary and may include students from sciences, management, marketing and other areas of study.

BENEFITS TO SPONSOR COMPANIES

Companies can benefit in many ways from sponsoring capstone projects, such as the following, gathered from Arizona State University and The Ohio State University

  • Interact directly with students
  • Tap students’ creativity and problem-solving skills
  • Improve processes, products and productivity
  • Gain fresh perspective from innovative engineering students
  • Improve quality and reduce costs
  • Evaluate student talent in a project setting

“Sponsors really like working with students,” Rhoads said. “I have repeat sponsors—the same company and the same individuals to work with the students. They want to be part of developing the next generation of engineers.” The students grow from the beginning of the autumn semester to the end of the spring semester, not just as young engineers, but as people, he said.

Figure 3Figure 3. Students demonstrating their capstone projects at The Polytechnic School, Arizona State University (Photo: Arizona State University)First-time sponsors are often pleasantly surprised with how students respond to open-ended projects with no well-defined solution, showing creativity and coming up with multiple solutions, Rhoads said. Sponsors are also impressed with how deeply the students get involved, taking the projects as their own. This makes them good potential employees, he said.

Sponsors of capstone projects at The Polytechnic School (TPS) at ASU are impressed with the students and how out-of-the-box creative and innovative they are, Beatty said. In addition to the creative freedom, the program involves a lot of writing, communicating and program management—skills not generally covered in class work that will be useful to students in their careers. “We try to simulate the real world as much as we can,” Beatty said.

The students benefit, too, of course. About 15% of TPS capstone sponsor companies are located far from the campus. This is different from many capstone programs, which require sponsors to be fairly nearby, and is actually a good thing, Beatty said. It prepares students for careers where they will quite likely be working with colleagues in different countries on different continents in different time zones.

This is an educational experience for the students, learning to function as a team and applying their academic knowledge while working hands-on. It’s also an opportunity to learn about specific companies and industries, perhaps prospective employers, by direct contact with products, processes and working engineers and other professionals.

HOW TO SPONSOR A CAPSTONE PROJECT

The National Fluid Power Association (NFPA) offers a summary of how to sponsor a capstone design project. One suggestion for finding a program is to look for higher education institutions accredited by ABET, which requires a capstone-type project in engineering programs.

These programs are structured to benefit both sponsors and students. Policies are in place about what support the sponsor provides, what part the university plays and what happens to any intellectual property created.

Programs differ, but generally the sponsoring company provides not only the problem to be solved or the design challenge, but also helps fund the work and provides support by one or more employees who join faculty members in mentoring the student teams. The work is usually done on campus, but may involve visiting the sponsor company or other locations.

The sponsor company typically receives the prototype built, drawings made, code written, etc., and owns any intellectual property created.

OTHER WAYS TO ENGAGE WITH STUDENTS

Figure 4Figure 4. Students at the end-of-year exhibits where they demonstrate their capstone projects at The Polytechnic School, Arizona State University (Photo: Arizona State University)Internships and co-op employment are familiar ways to introduce students to a company and bring their creativity and enthusiasm to the work in-house. Some universities offer additional options.

In the Microenterprise program at Ranken Technical College in St. Louis, students participate in paid part-time work on campus performing tasks for sponsoring companies. Nidec Corporation, manufacturer of many kinds of motors, participates in this program and refers to it as a reverse internship, where the work comes to the student, rather than the student going to the company to work.

A quick-turnaround project approach is Rochester (NY) Institute of Technology’s IdeaLab. Companies pose design problems that will benefit from brainstorming a creative approach. Teams of students do a weekend blitz of brainstorming, design, prototyping and testing with help from faculty and professionals from the sponsoring company. If the results interest the sponsor, the team can proceed to an IdeaMake semester to do further development.

Many opportunities exist for connecting with students at universities and other institutions of higher learning—as well as the benefits to sponsoring companies.


This email address is being protected from spambots. You need JavaScript enabled to view it. is web editor at VALVE Magazine

 

Examples of Capstone and Similar Company-Sponsored Projects

Oregon State University A team developed process improvements to speed the product changeover time on a freeze-dry packaging line for a food processing plant.

University of Minnesota A student team partnering with Tennant Corporation, manufacturer of commercial floor cleaning equipment, developed a piston pump centering mechanism for an industrial sweeper.

University of San Diego A team of mechanical and electrical engineering students designed and built an automated cryogenic flow control system for an unnamed industry sponsor.

University of South Carolina A South Carolina children’s museum has a huge sculpture of a child, the cleaning of which was very difficult. A capstone project team developed a robotic drone to blow dust off the sculpture.

Arizona State University

Rochester Institute of Technology

The Ohio State University

University of Maine

VALVE Magazine Print & Digital

Subscribe VMWNT20FREE SUBSCRIPTION*

• Print magazine
Digital magazine
• VALVE eNews
Read the latest issue

*to qualified valve professionals in the U.S./Canada

Looking for a career in the Valve Industry?

ValveCareers Horiz

To learn more, visit the Valve Careers YouTube channel to watch the videos below or visit ValveCareers.com a special initiative of the Valve Manufacturers Association

  • Latest Post

  • Popular

  • Links

  • Events

New Products