Valve Packing & Gasket Research and Development Devices
The continuous improvement of valve packing technology has created a new baseline for the industry to achieve emission levels that previously were possible only with the use of bellows seals.
#automation
Creating a Standard to Compare Control Valve Products
Each enthusiastic young engineer that comes into the workplace wants to reinvent the world.
#standards
Valve Automation Solution for Unconventional Shale Gas Challenge
With the rapid development of unconventional shale plays throughout the U.S. has come the challenge of transporting product to refiners and markets.
#automation
Proactive Defect Detection with Simulation Software
Through-wall leakers in cast valve bodies often can be the end result of undetected defective areas created during the metal casting process.
#iiot #materials
Five Key Criteria for Selecting Low-Temperature Valves
Specifying and consulting engineers, engineering houses, original equipment manufacturers (OEMs) and end users depend on valves to control the flow of compressed air or other fluids and on cylinders to control motion.
#automation
Relief System Management Software: Helping Companies Achieve PSM Compliance
On Nov. 15, 1990, the Occupational Safety and Health Administration (OSHA) made into law the standard for process safety management (PSM) of highly hazardous chemicals (29 CFR 1910.119), as well as section 304 of the Clean Air Act (CAA) amendments.
#standards #automation
SMRs Present Opportunities for Valve Manufacturers
In Part One of our two-part series on small modular reactors (SMRs), we introduced several projects in development, and presented a few of the situations in which SMRs could provide a reliable, economically sound solution for power production.
Solutions to the Engineering Skills Crisis
While plans to build billions of dollars worth of petrochemical plants, gathering and transportation pipelines are set for the next decade, there is concern that labor shortages in crafts, trades and design technicians could raise costs and delay commissioning of these important projects.
3D Printing: Changing Industry in Many Ways
It’s known by many names: additive manufacturing, rapid prototyping, layered manufacturing, direct digital manufacturing and, most often, 3D printing.
Valve Automation Solutions for Emergency Shutdown in Shale Applications
In many regions of the U.S., the proliferation of gas and liquids discovered and extracted from shale formations created a need for rapid infrastructure development.
#automation