Standards, Safety, Training Top Topics at Meeting
Twenty-five years ago, the member companies of the Valve Manufacturers Association of America (VMA) saw a need to promote both safety and quality in valve and actuator repair.
#basics #maintenance-repair #standards
Choosing Valves for New No-Lead Water System Regulations
In the U.S., regulations governing lead content of the components of potable water systems have seen considerable changes as safety restrictions tighten.
#water-wastewater #standards #components
New API Standard for Globe Valves
While the American Petroleum Institute (API) and other organizations published a variety of valve standards covering gate, ball, check, butterfly and plug valves for decades, the first for globe valves came out in 2013.
#standards #ball-butterfly-plug #gate-globe-check
Pressure Seal Standards Update
The EPA has been reducing the allowable fugitive emissions on valves in the last few years.
#standards #pressure-relief
Understanding Functional Safety Standards
While many people might recognize the term “functional safety” and assume they know what it means, for the purposes of standards, the term itself needs explanation.
#basics #standards
Emissions’ Standards, Innovation and Safety Highlight Technical Seminar
The theme of VMA’s 2014 Technical Seminar and Exhibition event was “Valve Emissions for Compliance, Standards and Technology” and the presenters covered the subject from every angle.
#standards #automation #VMAnews
Creating a Standard to Compare Control Valve Products
Each enthusiastic young engineer that comes into the workplace wants to reinvent the world.
#standards
Relief System Management Software: Helping Companies Achieve PSM Compliance
On Nov. 15, 1990, the Occupational Safety and Health Administration (OSHA) made into law the standard for process safety management (PSM) of highly hazardous chemicals (29 CFR 1910.119), as well as section 304 of the Clean Air Act (CAA) amendments.
#standards #automation
Trends in Independent Valve Pressure Testing
Before the industry slowdown of 2008, end users performed third-party pressure testing of valves for use in critical service according to the acceptance criteria of ASME B16.34, API-598, API-6D, etc.
#pressure-relief #maintenance-repair #standards
In Line Weld Repairs of Valve Defects
Valve Repair Activities per ASME Section I & B31.1
If you have valves in your plant manufactured from F-91 or C12A material you may have problems and need repair services.
#standards #maintenance-repair
Driving Valve Design in the Power Industry
Contrary to what might be expected, valve design in the power industry is not necessarily driven by codes and standards.
#standards
Cooperation between groups helps set standards for shale gas development
In a departure from the often contentious positioning taken by energy firms involved in hydraulic fracturing and the environment groups normally opposed to fossil fuel development, agreement has been reached to create a mechanism to establish standards for shale gas development.
#standards
Matrix Metals Announces Capability Integration of Indian Boiler Regulations
Keokuk Steel Castings and Acerlan Foundry (subsidiaries of Matrix Metals) announce the capability integration of IBR (Indian Boiler Regulations) Certification.
#standards
Spirax Sarco Introduces CS10 Clean Steam Separator with Enhanced Surface Finish
Spirax Sarco has released the CS10 Clean Steam Separator with an enhanced surface finish as standard.
#pressure-relief #standards
Emerson Expands the Smart Machinery Health Portfolio
Emerson Process Management’s Smart Machinery Health portfolio now provides an integrated protection and prediction solution for critical reciprocating compressors.
#iiot #automation #standards
VMA Leadership Forum: Fugitive Emissions, API Standards and More
Each year the Valve Manufacturers Association hosts a meeting specifically for member companies’ top executives.
#VMAnews #standards
Nickel-Copper Alloys
Q: Are the nickel-copper alloys (such as UNS N04400) acceptable for use in accordance with the NACE sour service standards?
#materials #standards #maintenance-repair
Flowserve Announces SIL 3 Certification for Limitorque MXa Actuator
Flowserve announces the availability of the Limitorque MXa electric actuator with up to a SIL 3 safety rating.
#actuators #standards
Spirax Sarco Introduces the Fig 36HP Strainer Range Rated to ASME Class 600 Standards
Spirax Sarco is pleased to announce the release of the Fig 36HP stainless steel Ytype strainer rated to ASME Class 600 standards and therefore meets the needs of a wider range of applications.
#pressure-relief #standards #materials
Standards Spring from the Need to Protect
Most of us in the valve industry take for granted the interchangeability and standardization of the valves produced today.
#valvehistory #standards