VMA Welcomes Portland Valve
Portland Valve is a part of the CIRCOR family, and manufactures a full line of high-performance butterfly valves as well as the controls to accompany them, together creating dependable valving systems for a wide range of Navy applications.
#maintenance-repair #VMAnews
Share
Portland Valve is a part of the CIRCOR family, and manufactures a full line of high-performance butterfly valves as well as the controls to accompany them, together creating dependable valving systems for a wide range of Navy applications.
The company's test loop provides the proper flow to accurately set the regulators for all styles of regulating valves. Consequently‚ no fine tuning of these valves is required during installation and all valves meet the requirements for system commissioning (plug-and-go).
Aside from regulating valves‚ Portland Valve is capable of refurbishing all valve types which they manufacture and many types they did not manufacture originally.
RELATED CONTENT
-
Valves in Oxygen Service
In his presentation at VMA’s 2017 Technical Seminar, Kurt Larson, a process control engineer for Air Products, spoke about the inherent danger of the oxygen production business and how it is particularly important for end users and valve manufacturers to work closely together.
-
Actuator Issues? Use This Checklist!
While there may be 40 reasons valve actuators may stop working, there really is only a handful of components that can cause the problems. So, if you have an actuator on the fritz, here are the five things you need to check.
-
Proper Care of Knife Gate and Slurry Valves
How to resolve—and avoid—field failures of knife gate and slurry valves
 Unloading large gate valve.jpg;maxWidth=214)