Published
GARLOCK SEALING TECHNOLOGIES: SGi Bearing Isolator
GARLOCK SEALING TECHNOLOGIES announces the launch of a new bearing isolator that incorporates shaft grounding technology.
#components #automation
Share
The Garlock SGi is the first seal to offer maintenance free and reliable bearing protection by preventing bearing contamination, lubrication loss and electrical damage. The Garlock SGi is a marriage of the Garlock GUARDIAN non-sparking, non-contact labyrinth seal and the AEGIS shaft grounding ring. The seal protects the bearings from electrical discharge damage, while at the same time preventing contamination ingress and lubrication egress.
RELATED CONTENT
-
Valve Selection for Bypass of Control Valves: A Case Study
A bypass line including a bypass valve is typically installed to provide continuous operation in case of regular maintenance of a control valve.
-
Valve Basics: Electric Actuator Controls
Electric valve actuators control the opening and closing of valves. With a motor drive that provides torque to operate the valve, these actuators are frequently used on multi-turn valves such as gate or globe and also on ball, plug and other quarter-turn valves.
-
The Misunderstood Check Valve
Too often this valve is unjustly blamed when problems occur, but the real culprit is its use in the wrong applications.
 Unloading large gate valve.jpg;maxWidth=214)
