Published January 13, 2025
ifm’s MVQ positioner is used to move valves to the required position, based on a signal from the control level indicating the degree to which the valve is open in percentages.
ifm’s MVQ positioner is used to move valves to the required position, based on a signal from the control level indicating the degree to which the valve is open in percentages. Based on the MVQ sensor and supplemented by a new control unit, the connected solenoid valve is moved to the required position using supply and exhaust air. It has a self-learning algorithm to continuously monitor, improve and expand the performance of the positioner over time. The positioner comes as a set including the MVQ301 sensor and control unit, a pneumatic solenoid valve, a throttle plate and a Y cable, and can be installed directly on the NAMUR interface of an actuator. ifm.com
Taylor Valve's Environmental Protection Cap will withstand discharge pressures up to 3000 PSI in temperatures from -45 to 300.
April 20, 2012
CAMERON’S ENTECH DRV-BN nozzle check valve was designed to provide three mandatory requirements of a check valve: non-slam, low-pressure drop and virtually no maintenance in large-diameter applications.
April 21, 2011
Upgraded design
March 31, 2026
